Installation Guide
for GAN GA+

Our engineers have been working tirelessly on making GAN devices easy to manage and install. Harness the performance potential of your car! In most cases, you can install GAN products yourself in less than 15 minutes.

CONNECT YOUR GAN TO YOUR CAR

SELECT YOUR CAR ON YOUR SMARTPHONE

GET THE EXTRA POWER

INSTALLATION VIDEO

10 Easy Steps

Step 1

Download the GAN app from the App Store for iOS or from Google Play for Android

Step 2

Warm up your engine to operating temperature (90°C).

Step 3

Find the OBD-II connector in your vehicle; it is usually located under the steering wheel. You will find the exact location of the OBD-II connector in the installation guide for your car.

Step 4

Plug the device into the OBD-II connector when the engine is running

Step 5

Connect to your GAN in the application. Use the last 6 digits of the device’s serial number as a password.

Step 6

Select your car in the application. The necessary settings will then be sent to the device.

Step 7

Calibration begins once the settings have been downloaded; this takes 3 minutes. A red LED will flash during calibration and you can check the calibration status on your smartphone. Once the calibration is finished, the LED will turn yellow to show the device is working.

Step 8

Choose between DYNAMIC, ECO and STOCK (OFF) mode on your smartphone.

Step 9

A 120 km drive is required before the device adapts to the engine control unit.

Step 10

Feel your car in a new way!